Integrate Hanwha WisenetRoadAI with VMS

This guide explains how to integrate Hanwha WisenetRoadAI (ANPR/LPR) with your Video Management System (VMS). Following these steps ensures that Automatic Number Plate Recognition (ANPR) events trigger bookmarks or other automated actions in your VMS.\

Step 1: Configure the camera web interface

Enable integration within the camera internal application settings to send data to the VMS.

1. Open a web browser and enter your camera IP address.

2. Go to Settings > Open Platform.

3. Select Go App (WisenetRoadAI) to open the application interface in a new tab.

4. In the WisenetRoadAI interface, select the SETTINGS tab.

5. Turn on Wave integration (this setting applies to all Powered-by-Nx customizations).

6. Enter your Media Server connection details:

   • Server IP: Enter the IP address of your Media Server.

   • Port: Enter 7001 (default server port).

   • Credentials: Enter the username and password for your dedicated VMS integration user.

Step 2: Configure the VMS event rule

Create an event rule in the VMS to capture plate detections and trigger an action.

Set up a lookup list (Optional)

If you want to trigger events based on specific vehicle groups (for example, blocklists or allowlists), configure a lookup list:

• Option A: Open the Main menu > Lists Management, and create or edit a list.

• Option B: In the Notification panel (right side of the Desktop Client), select the Objects tab, right-click a vehicle notification, and select Add to list or select an existing list. 

Create the event rule

1. Open System Administration > Event Rules.

2. Click Add to create a new rule.

3. Under When, set the event criteria:

   • Event: Select Analytics Object Detected.

   • Occurs at: Select your Hanwha LPR camera(s).

   • Of type: Select for example Vehicle. (or bus, car, etc.)

4. (Optional) Under And Object, select is listed in, then choose your desired lookup list.

5. Under Do, set your target action:

   • Action: Select Create Bookmark (or your preferred action).

6. Click Apply, then click OK.