Lloyd Riley

Hello, You can check out the "How to Buy" section of MyNetworkOptix. https://www.networkoptix.com/my/how-to-buy-nx-witness-vms

That is good to hear. If you ever need to check the health of the cloud service you can use https://status.nxvms.com

Hello,My experience is that Nx Cloud is very good. Did you manage to overcome this issue? I would create a segregated test enviroment and compare.

Hello,I have the same with some edge devices (where the device manufacture provides the Nx software build). You can access server / device directly and update manually if the automatic update does ...

Hello,I would personally keep this seperate so that I can diagnose any issues that may happen down the line with my storage hardware.

Hello,From my understanding this is not possible. To add to this I do not believe the Annke analytics is supported, although Network Optix or your supplier will be the best point of contact to conf...

Hello,As this issue is with two different brands of cameras it is likely you have a problem you need to address. I have this from time to time on different brands of cameras that are configured as ...

Hello, are you trying to merge two servers? When does this message appear?

Hi all, to confirm. When the system is Offline via Nx Cloud that if Thomas restarts the actual server it then comes Online again. Also Thomas can connect to the server using remote desktop software...

No worries, at all. You should be able to leave Smart Motion enabled. I actually have Smart Motion Detection enable to send an email directly from the camera.