Event Log

Hi All,

I have Bosch and Axis cameras on my NX server 5.1. I keep getting Network Issue log with RSTP primary or secondary stream error. However when I check the camera and playback everything is smooth. Additionally I tried to disable any event rules and notification with luck. Even deleting all existing rules and disabling all notification didnt help. I started the server but still no. I removed the log from system32/config/....../logs/ but still didnt help. Please share your thoughts on this. I have attached some snips for reference.

Lloyd Riley

November 20, 2023 09:46
Edited

Hello,
As this issue is with two different brands of cameras it is likely you have a problem you need to address. I have this from time to time on different brands of cameras that are configured as unicast that I record on two different servers at the same time. I would work with one of the cameras (that has the issue) and try to work out what is causing it within my system. For example, network configuration, network switch, camera firmware, camera configuration, multiple recording points etc

Event Log

Comments

Didn't find what you were looking for?