Greg
- Total activity 49
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 15
Activity overview
Latest activity by Greg-
Greg commented,
-
Greg created a post,
Luminys camera Vendor and model info reversed
AnsweredI have seen recent discussions regarding the vendor and model information being reversed for Luminys and Hikvision cameras. I have a Luminsys P54-4DA25 that has the vendor and model information rev...
-
Greg commented,
I have a similar situation with a Luminys PTZ camera with a pano camera built in. It is asking for a license for each sensor whereas on previous installations on other sites using the same type of...
-
Greg commented,
Make sure you have the camera set to the current time and date as well thru the camera webpage
-
Greg commented,
Found issue, polling port on cameras needed to be set to 8080. Analytics work now although the functionality of having object events displayed in the VMS is intermittent App displays events consis...
-
Greg commented,
Yes, please reopen the ticket. I have the camera port forwarded now.
-
Greg commented,
Still havent regained PTZ control over this camera in any of the builds since going up all the way to the latest 42624
-
Greg commented,
I set it in smart event under VCA. Some Hik cameras advertise object detection but I confirmed with them recently that the cameras need to be Acusense to work with NX or DW
-
Greg created a post,
Provision-isr analytics
CompletedHas anyone had success lately with provision-isr camera analytics working?I was in contact with Provision tech support and received some plugins to install and the plug in shows up in the integrati...
-
Greg commented,
If you search google there are hikvision firmware updates available for that model. I wasn't able to do my updates remotely is the reason why I did the rtsp stream fix instead. Ive had this issue...