Anderson Chang

Hi @..., The Nx Server is an application, which will send the queries to the OS for reading or writing the data into the storage volume.The Nx Server reports "Not enough HDD/SSD speed for recording...

Hi Bogdan Manole, Thank you for providing the testing result. For further investigation, please help to collect and share the server DEBUG log with us by:1. Follow this support ARTICLE to set the s...

Hi Joel O'Connor, The Server Conflict event is a default event, which by default will write to the Event Log and can not be disabled. You may disable/remove the three default Server Conflict Event ...

Hi Brett Yudelman, It looks like there is some issue with the camera timestamp. Please follow the below instructions and see whether the issue persists. Check the time setting on the cameras and e...

Hi @..., I apologize that I did not explain the rule clearly, which might make you misunderstand the rule. A. The available space on the disk must be at least larger than 10% of the largest disk (...

Hi @..., Here are some general rules for the Nx Server to recognize and utilize the disk:A. The available space on the disk must be at least larger than 10% of the largest disk (storage volume) on ...

Hi sabari rajan, One Professional Recording License provides one channel, which is the ability to record an IP video stream from an IP camera, an RTSP stream, or an HTTP link. Therefore you need on...

Hi @..., Due to the function that Nx Cloud provides, it requires the direct internet connection from the Nx System/Server to the Nx Cloud.Without the direct internet connection, the UDP hole punchi...

Hi Campbell Steven, A late notice: The Nx Witness starts to support some of the Dahua VCA on 5.0 version software.Please refer to our 5.0 version release note for further information. Thank you.

Hi Miguel Dina, My colleague Norman brings some thoughts about this issue with me. Therefore, besides following the above instructions, for further investigation, please also provide the OS version...