Armed & Disarmed state.

Answered

Comments

5 comments

  • Avatar
    Fabian Penasse

    I agree, we should be able to enable/disable rules with an action and not only by the calender.

    1
    Comment actions Permalink
  • Avatar
    Norman - Nx Support

    Hi Andrew Sharrem and Fabian Penasse,

    You actually can do this. Please check THIS support article for the solution. 

    0
    Comment actions Permalink
  • Avatar
    Tagir Gadelshin

    Andrew Sharrem

    Thanks for the great suggestion!

    It's in the roadmap, but currently, we work on the internal rules engine (architectural changes). Those changes are required so we can implement new shiny features. So after completing and releasing those internal changes we'll be able to implement arm-disarm soft triggers too

    For the time being, take a look at this video where our partners configure arm/disarm states via HTTP event and soft triggers changing via API:
    https://www.youtube.com/watch?v=fQCgl30WXHY&list=LLjI5q-Jd1PMJqKvQx46zkpQ

    It's kinda complicated, but doable, video clearly explains what is needed

    UPD. Norman was a bit faster. His support article actually explains methods that are used in the video that I've posted

    0
    Comment actions Permalink
  • Avatar
    Fabian Penasse

    I Norman, Thx.

    It would be so much easier to be able do do this (activate/deactivate rule) from out the action list. But In the mean time we have a work around :)

    0
    Comment actions Permalink
  • Avatar
    Lieven Samijn

    We use AI for outdoor detection and to possibity to actvate/deactive some rules  in the action area would help us a lot.

    it is possible with the API but it is very difficult programming for a lot of our installers. it's also very difficult to make a manual for it. would be a lot easier if there was an action to disable / enable another rule

    0
    Comment actions Permalink

Please sign in to leave a comment.