Aaron ONeill

We use soft buttons to remotely reset 5G routers that have the associated camera on. When a camera goes offline the buttons also disappear. Can we have the feature implemented so the buttons ar...

Hi I need to trigger a soft trigger via a button on an Axis joystick.  Is this possible?   Or alternatively just send a HTTP notification to a device from a button on the joystick   Thanks aaron  

Hi Norman New install with latest v5 release. Clients on all PCs (3of) ran instantly from fresh install. In client local settings i have added a mapped network drive where the client holds exported...

Hi We are currently upgrading an old system which is running NX version 3.x.  The end user has no password information for the currently installed devices on NX (Cameras and encoders).  As its an o...

Hi I have 8 cameras that i re stream to WebRTC using the rtsp://nxserver:7001/cameraid scenario.  All 8 cameras are encoded at H264 from the camera/NX settings, however one particular camera will o...

Hi We have a scenario whereby we have 4 layouts across 4 monitors on one workstation (client only no video wall licence). Each monitor shows a single image of a PTZ device.  The client wants to be ...

Hi Could someone assist with the attached logs please.  Client cameras are constantly going off/on or disconnecting from the server. Server has approx 80camera/device channels, recording at 10fps 1...

Hi   I have a batch file to launch 3 instances of the client to load on 3 seperate monitors with 2 number custom layouts "Layout 1" & "Layout 2" - These work as expected.  The 3rd instance i want t...

Hi We have a Axis Radar D2110-VE.  It is associated to a none Axis PTZ.  With this in mind we need to create zone within the radar, which in turn need to fire individual presets on the camera. In N...

Hi With regards to the Axis M7016 16 channel encoder, which has an IP address per block of 4 channels. What Licencing options are required to record/view/playback and control analog PTZ cameras. ac...