Barry Dent
- Total activity 17
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 1
- Subscriptions 5
Activity overview
Latest activity by Barry Dent-
Barry Dent commented,
Hi Calvin Wientjes: some comments that I hope will be helpful. I'm not a technical person so this may require minor correction by others. I've since moved away from the RPi system with 512 GB Weste...
-
Barry Dent commented,
Thanks Norman Graafsma. One further question. I am considering deploying an Odroid N2+ in my solar-powered set-up, because it can be powered directly by 12V DC as opposed to the USB-C of Raspberry ...
-
Barry Dent created a post,
NX Witness Server on Device Running Venus OS or on a Router?
AnsweredI have a camera on a solar-powered system in a remote location, with internet access via an expensive and not-too-fantastic 4G connection. In other posts it appears to be a very good idea to house ...
-
Barry Dent commented,
Thanks to all responders. Good luck with implementing on the Axis ARTPEC-8 devices. If it works out it would be good to see it trickle down to ARTPEC-7 and below. For me, it will be a complicated c...
-
Barry Dent commented,
Thank you, that sums it up well for me. It's clear that in my situation- an expensive cellular data plan- that the Server needs to be on site on the same network. As technology evolves, we can hope...
-
Barry Dent commented,
To clarify, that data consumption of 400 MB per hour is when almost no motion is being recorded. The system is set to record on motion-only and not to record the substream continuously. Motion even...
-
Barry Dent created a post,
NX Witness Server as an Axis ACAP App?
PlannedThis arises from a question I asked about how best to configure a remote solar-powered camera. The answer to that was that it was better to deploy NX Witness Server on a SBC such as a Rpi, on the s...
-
Barry Dent commented,
Thanks for that. I agree that the power consumption of the NUC or RPi is only a small extra increment compared with the power consumption of the camera and IR lighting. I am still curious though, w...
-
Barry Dent created a post,
How to minimise data use when camera is on a different internet connection from server?
AnsweredI am setting up some wildlife cameras in a very remote location. The NX Witness Server is installed on a Raspberry Pi 400 with 4 GB RAM and 512 GB WD SD card at "location 1", which has a 4G wireles...
-
Barry Dent commented,
Thank you. I have followed the procedure and the partition is now much bigger. I will monitor recording to see that all is behaving properly now. Appreciate your quick response.