Is it possible to choose ONVIF profiles to connect other streams instead of primary/secondary ?

Answered

Comments

12 comments

  • Official comment
    Avatar
    Norman Graafsma

    Hi Tomasz,

    As mentioned in the ticket you created. 

    You can't change URLs from already discovered cameras. 
    I will provide your feedback to our dev team. 
    It is not something I expect to be changed soon if at all. 

     

    JIRA-FDBK-201

    Comment actions Permalink
  • Avatar
    Kealohi Kenui

    I'm doing testing / research on different systems in order to provide an end result solution for a few different companies. One of the programs I happened to run across was <another VMS> by <another company>. The way you add camera's in their system is one of the best I have seen as the <another VMS> allows you to do step by step, test, make a selection, then test your choice. It then provides you with results and allows you to choose which one you would like to use instead of forcing you to use a specific one. This is both for their Auto Discovery as well as add camera wizard. It s a step by step option that gives the end user a choice. This is something your programmers could possibly look at as I know for my scenario it is a better option. Most SA like to have the choice as to setup. I ended up have to turn off auto discovery on NxWC to add a camera because the auto discovery kept choosing the wrong stream which did not give me full functionality of my camera like I wanted.

    2
    Comment actions Permalink
  • Avatar
    Norman Graafsma

    Hi Kealohi Kenui,

    I hope you don't mind I edited the brand and company you mentioned since it is best to promote their solution in their community. This community is intended for sharing Nx Witness experiences. 

    We value your feedback therefore I let the rest of your reply untouched I'm sure our product team will read your comment and take it into consideration for future reference. Thank you.  

    0
    Comment actions Permalink
  • Avatar
    Tagir Gadelshin

    Tomasz Polus
    Thanks for the valuable feedback! This ticket caught the attention of the community

    I work in Nx product team and I need some details regarding your problem.
    I've opened a follow-up to your support ticket in our system, please take a look on it

    I'll post some summary of our discussion here afterwards so the community will stay informed.

    0
    Comment actions Permalink
  • Avatar
    Tagir Gadelshin

    Tomasz Polus

    Simple "Edit streams" will be wrong, cause Nx will continue configuring some specific profile and wait for some specified stream, but cause the link is re-configured it will receive some other stream, which can cause lots of errors.

    As discussed, the most convenient way of doing this will be adding a possibility to choose which ONVIF profile Nx should use for each stream (this will be located on the Advanced tab of Camera Settings). This was asked by other customers as well and it will broaden usage scenarios. For your scenarios, you will also need to set the "Keep camera stream and profile settings" checkbox on the expert tab.

    We included this in hotfix roadmap, so finger crossed we release this till the end of this year

    0
    Comment actions Permalink
  • Avatar
    Tagir Gadelshin

    Tomasz Polus Kealohi Kenui
    and everyone else, who voted for this or interested in what is going on

    We made the first estimates for this task. I'm pushing this in the hotfix, we passed the prototyping stage. I can share some mockups about how we are planning to do this
    (drop-downs will be available only when the checkbox is ON)


    Please, be aware that this is only a prototype and things may change or we can face some architectural issues during the implementation and the feature will be excluded from the release.

    but so far we are doing everything to include this in an upcoming release, which we hope will be released sometime this year 

    0
    Comment actions Permalink
  • Avatar
    Tomasz Polus

    Hi, thank you for good news. I keep my fingers crossed and cannot wait to see this hotfix.

    It looks reasonable, just please make sure we can select all ONVIF profiles which are defined in the camera. Not only factory default profiles (which usually cannot be modified), but also our own customized ONVIF profiles, which we add to the camera with (for example) ONVIF Device Manager tool.

     

    0
    Comment actions Permalink
  • Avatar
    Jeff Jones

    I was just having a problem with a few Amcrest cameras which seem to output the mainstream URL in both profiles. Maybe this will allow me to fix the problem.

    Alternatively, just being able to edit the URL in the general tab would also work in my case since the substream exists but ONVIF apparently doesn't report the URL properly. The firmware is almost a year old, so I'm betting they aren't going to fix it.

    1
    Comment actions Permalink
  • Avatar
    Edward Dickey

    I am having exactly the same problem as Jeff with Dahua 4431F-AS cameras with 2016 firmware which for some reason refuse to upgrade to later (2017/2019) firmware.

    Jjust being able to edit the URL in the general tab would also work for me for this. Norman G says this will likely happen in the future. 

    0
    Comment actions Permalink
  • Avatar
    Duncan Miller

    I am hoping this will solve some of my issues with some Dahua Fisheye Cameras that I have been having over the past year. Any idea when this might be released? 

    0
    Comment actions Permalink
  • Avatar
    Norman Graafsma

    Hi Duncan Miller,

    At this stage, we can't offer a solid release version or date. 

    0
    Comment actions Permalink
  • Avatar
    Tagir Gadelshin

    I can only add that we are not expecting this to be a part of the 4.2 release

    0
    Comment actions Permalink

Please sign in to leave a comment.