Motion Recording: IQeye

Completed

Glynn Thomas

May 25, 2018 03:58 Edited

Hi,

In the process of converting a client from their existing VMS to NX. Going very well....BUT......

How do I obtain motion recording for IQEye cameras- specifically IQD41S and 755? 

I've browsed the camera and cannot find any stream info.

I realise they are old cameras, but are still working and producing good images. I know they are mjpeg only, but are in low motion areas so don't use lots of storage.

Cheers,

Glynn

We have 2 of each on the  system (out of 48 cameras) and I don't really want to replace them if at all possible (one is high---15m up with an Immervision wide angle lens!)

0

• 

  Ichiro

  • Network Optix team

  May 25, 2018 06:44

  Hi Glynn,

   

  Nx Witness now can support the stream via the protocol - ONVIF, RTSP or HTTP.

   

  You can simply check the iQeye article and use their suggested approach to add the stream into Nx.

  https://vicon-security.zendesk.com/hc/en-us/articles/210735063-What-is-the-URL-to-stream-directly-from-my-IQeye-camera-

   

  To add the stream into Nx, please refer to the article - https://support.networkoptix.com/hc/en-us/articles/215247978-Add-an-IP-Camera-or-Video-Source

   

  If the camera can't provide dual streams, then you will need to enable the expert mode and choose one of the streams to do motion detection.

   

   

  However,  as you already know, they are pretty old cameras, so please check iQeye for more detail and check if they can provide HTTP/RTSP streams, if not, then Nx might not be able to manage it.

  0

Post is closed for comments.