Questions about Nx with Logitech Extreme 3D Pro joystick

Answered

Permanently deleted user

March 07, 2022 03:07

Questions about Nx with Logitech Extreme 3D Pro joystick

The Nx version used is V4.2.0.32840
Matching camera equipment is ACTi Z950
Status description: After the joystick of the joystick returns to its original position, it can be seen that the PT of the fast ball is still moving slightly slowly. At this time, you need to click the screen of the Z950 fast ball with the mouse to stop it.

It is suspected that although the joystick has returned to the center, there may still be a slight change in the Hall vector. Is it possible to set the buffer in NX, and the Hall vector data obtained by the joystick operation will no longer exceed In the buffer zone, when the joystick is regarded as standing still

In addition, can the hotkeys provided by the Logitech Extreme 3D Pro joystick be excluded from the Nx, because the Nx's internal preset will link the hotkeys on the joystick

At the same time, because of the overall needs of customers, is it possible to temporarily disable the joystick through API settings in Nx?

 

0

• 

  Norman

  • Network Optix team

  March 07, 2022 08:05

  Hi @...,

  The mentioned joystick is a non-supported device, and we recommend using a supported device, like the Axis T8311 or the Hanwha SPC-2000, or a mouse or a keyboard.

  0
• 

  Permanently deleted user

  March 07, 2022 08:26

  So is it possible to turn off the joystick support in Nx?
  Because this joystick client has other applications

  0

Please sign in to leave a comment.