Fix Camera to specific server?

Answered

Tanapol Euaungkanakul

September 30, 2021 06:56

Hi,

Can I fix Camera to a specific server, but let it failover when that server is offline?
And let it move back to prefer server when it those server is back online?

For example
Cam100-150  -> Server A   (Network Switch A)
Cam200-250  -> Server B   (Network Switch B)
Cam300-350  -> Server C   (Network Switch C)

When I enable failover some Cam just move other server.

the reason behind this is cam1xx 2xx 3xx are in differnet locations/building
If cam1xx is on Server B then there will be a lot or traffic between Network Switch which mean It will use alot of bandwidth from inter-building link.

0

• 

  Norman

  • Network Optix team

  September 30, 2021 08:44

  Hi Tanapol Euaungkanakul,

  There is no way to configure such in the system, but you can manipulate this through the network configuration by giving each set of cameras its own subnet and route these subnets to the applicable servers.

   

  0

Please sign in to leave a comment.