Integration of Pansonic cameras MPEG-4/JPEG
Answered
Hello,
I would like to integrate a few older Panaonic cameras.
They mostly only support MPEG-4 / JPEG
Has anyone managed it yet?
Regards
-
Hi Gerhard Kosira,
MPEG-4 isn't supported within Nx Witness, but MJPEG has a serious chance it will work.
The URL format depends a bit on the model, so if you can list the models you have, I might be able to provide you with the proper URL format.
0 -
Hi Gerhard Kosira,
We have not heard back from you in a while, so we are going to assume your question has been answered and set this topic to closed. Please note that you can reopen this topic and continue to receive support from us by simply replying to this thread.
0 -
Hi Norman,
Please excuse me, the customer couldn't make up his mind right away
I have the following types of Panasonic cameras:
WV-NP24x
WJ-NT304-1
WV-NF284
WV-NS202
WJ-NT304-2
there are about 100 pcs
Thank you for your help0 -
Hi Gerhard Kosira,
Please try the following URLs:
For WV-NP24x, WJ-NT304-1, and WJ-NT304-2 the following URL could be used:
http://<ip_address>/cgi-bin/mjpeg?stream=0
stream 0 for the primary stream and stream 1 for the secondary stream
For WV-NF284 and WV-NS202 the following URLs could be used
http://<ip_address>/cgi-bin/mjpeg
http://<ip_address>/nphMotionJpeg0 -
Hi,
big thx !
Regards
0 -
Hi Norman,
Unfortunately it did not work
Regards
0 -
Hi Gerhard Kosira,
Is there an option to forward the cameras, so we can access them remotely?
We might be able to capture the right RTSP format URL with Wireshark.
Please let me know if this is possible, and I'll create a ticket on your behalf, so you can share the login credentials in a confidential manner.
0 -
Hi Norman,
I can arrange that. Please open a ticket for me.
Many thanks for the help
Regards
0 -
Hi Gerhard,
I created a ticket on your behalf.
0
Please sign in to leave a comment.
Comments
9 comments