Rick Sayre

Yes, the lights will be turned on every now and then.  I noticed watching the stream with VLC that even with the lights out, occasionally I saw full-frame flashes, which I did never see with nx, so...

Thanks for the update It has taken typically a few weeks before motion search starts failing With everything dark, I'm not sure how you'll know when motion search has failed?  I can see about putti...

OK, I will do so as soon as I have procured the camera. It was my understanding from Boris' comment that the system has ceased detecting motion server-side because of time desynchronization.  Surel...

...and as I mentioned, I would very much like to see some kind of alert/logging ability for loss of smart-motion.  Can this be logged here, or would you prefer I make the suggestion over in the oth...

As I mentioned in the report, these cameras do not have working second stream, so motion is done on the primary stream . I believe I can source a loaner camera, though everything is much slower in ...

...also, although I hinted at it I was not specific: There are two Vicon V962D-N312,  both running the latest VCN01.2.1986.96 firmware. Only one of them has the smart-motion problem. Both use diffe...

I'm afraid that is not possible, no remote access can be provided One thing I have done with other VMS vendors in the past has been to send either a rtmp recording from VLC of the camera or a wires...

Everything was fine until this morning, when there was a power failure. Server has UPS, problematic camera does not. As of an hour after the power fail, that camera is once again not sensing any mo...

OK, updated and will monitor Thank you! Cheers

The camera is a Vicon V962D-N312, running the latest VCN01.2.1986.96 firmware. NX Witness is 4.0.0.29987 The Vicons I have are both using wireless interfaces [the cameras themselves are not wireles...