Uniview PTZ and triggering an output

Completed

Follow

Brett McEntee

• November 16, 2023 03:27
• Edited

Hi, I have a couple of Uniview PTZ cameras, added via auto discovery.  I'd like to use the output on the cameras to trigger a gate.  The output works direct via the web interface of the camera, but not as a soft trigger in NX.

NX Sees an available output of Output Relay 0 as well as an auto option. Neither works.  NX knows it is a Uniview camera, and is using Uniview plugin 1.0.0

Camera model: IPC6254SR-X33DUP

FIrmware: HCMN-B2201.6.9.220415

NX Server V: 5.1.1.37512 - Note: Output did not work on previous versions either.

Just for reference, I've checked with Onvif Device Manager, and the relay triggers happily via that.

Thanks For any advice given!

 

0

• 

  Wendy Chuang

  • November 16, 2023 03:51

  Hi Brett McEntee,

  Could you help to forward the camera for us to look into?
  If it's OK, I'll create a ticket for you to share the sensitive info.

  Thank you.

  0

  Comment actions Permalink
• 

  Brett McEntee

  • November 16, 2023 04:01

  Hi Wendy,

  I can send any info you need, if you'd like to create a ticket and let me know what you need, I'd appreciate it. 

  Brett

  0

  Comment actions Permalink

Post is closed for comments.